Petzl - VOLT® WIND International Version
Comfortable fall-arrest and work positioning harness for wind turbine technicians with attachment point for progression along a vertical rail or cable-based fall protection system. 5 attachment points
The VOLT WIND is a fall-arrest and work positioning harness with five attachment points, specifically designed for wind turbine technicians. FAST opening buckles make it easy to don with both feet on the ground and DOUBLEBACK self-locking buckles allow for quick adjustment. It is designed to be comfortable, adjustable, and supportive for work at height. The LADDER CLIMB ventral attachment point can be used to connect a trolley and easily and comfortably move along a rail or cable-based fall protection system. Protective plates on the back of the shoulder straps and waistbelt help shield the webbing from friction-induced wear when moving inside a wind turbine tower. Equipment loops and tool holder slots allow the user to organize and carry all the equipment needed for the job at hand.
Detailed description
- The VOLT WIND features protective plates on the back of the shoulder straps and waistbelt to limit wear on the webbing and provide comfort when moving inside a wind turbine tower
- Quick donning and easy adjustments that don’t slip:
- Dons quickly with both feet on the ground
- Waistbelt, sternal point, and leg loops are equipped with FAST opening buckles for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves
- Adjusting the harness is convenient and easy, with DOUBLEBACK self-locking buckles on the shoulder straps and waistbelt
- Anti-slip devices installed on the DOUBLEBACK buckles help maintain the desired adjustment throughout the workday
Comfortable construction and optimized adjustment system:
- Widely spaced shoulder straps reduce neck chafing
- All contact zones use contoured foam and are lined with breathable material, including the shoulder straps, waistbelt and leg loops, making it more comfortable to work and move around
- Sliding dorsal straps are adjustable, providing more ease of movement and adapting to different body sizes
- Adjustable strap between the dorsal plate and waistbelt allows the harness to be properly positioned
- Semi-rigid waistbelt and leg loops provide optimal support
- Leg loop foam can be repositioned for the perfect fit
- Elasticated leg loop bands (can be replaced by the user, available as spare parts) allow the harness to maintain proper adjustment whether the user is walking or suspended
- LADDER CLIMB ventral attachment point:
- For progression along a vertical rail or cable-based fall protection system, allows for ventral attachment of the trolley for better load distribution on the waistbelt
- In the event of a fall, the attachment point automatically moves upward to a sternal position, allowing a vertical post-fall body position
- Practical:
- Textile dorsal attachment point for connecting a self-retracting fall-arrest system
- Two textile slots on either side to install a work seat for increased comfort while suspended
- Two side attachment points can be folded down to prevent them from snagging accidentally when not in use
- Shoulder straps are equipped with a lanyard parking system for MGO connectors
- Waistbelt features 2 equipment loops and 2 slots for CARITOOL holder and TOOLBAG pouch to easily organize equipment for the workday
- In the event of a fall on the dorsal attachment point, a red indicator appears, signaling that the harness should be retired
- Eco-friendly design: textile components contain at least 55% recycled materials, equivalent to about 30% of the total weight of the harness (this calculation was done using the harness that best represents the VOLT range)
Video
Specifications
- LADDER CLIMB ventral attachment point: Attachment for a positioning lanyard in single mode, a descender, or a fall-arrest trolley
- Lateral attachment points: Attachment for a positioning lanyard for use in double mode
- Sternal attachment point: Attachment for a fall-arrest system
- Ventral attachment point: Attachment for a fall-arrest system
- Rear attachment point on the waistbelt: Attachment for a restraint lanyard
- Certification(s): CE EN 361, CE EN 358, CE EN 813, ANSI Z359.11, CSA Z259.10, GB 6095, JSFAD
- Material(s): Nylon, polyester, aluminum, steel
SKUs
| SKUs | C072DB00 | C072DB01 | C072DB02 |
|---|---|---|---|
| Color(s) | Yellow, Black | Yellow, Black | Yellow, Black |
| Size | 0 | 1 | 2 |
| Waist belt | 65-80 cm | 70-93 cm | 83-120 cm |
| Leg loops | 44-59 cm | 47-62 cm | 50-65 cm |
| Stature | 160-180 cm | 165-185 cm | 175-200 cm |
| Weight | 2365 g | 2435 g | 2505 g |
| Guarantee | 3 years | 3 years | 3 years |
| Inner Pack Count | 1 | 1 | 1 |
Scannable är en plattform som möjliggör full uppsikt över sin fallskyddsutrustning.
Systemet påminner och inspektionsdatum, innehåller manualer och de inspektioner som utrustningen har genomgått.
Man kan koppla en NFC-tag till varje utrustningsdel i Scannable för att göra inspektionen mer tidseffektiv. Men det går också bra att söka upp utrustningsdelen med hjälp av serienummret.
Med hjälp av menyerna nedan kan ni få er utrustning registrerad av oss i Scannable direkt och finns då redo hos oss då vi inspekterar er utrustning i framtiden. Vi kan också montera ev NFC märkning på dessa.
Förklaring av NFC-tag:
Rope Tag: Denna läggs in i kärnan på repet i ena ändan.
Carabiner / Hardware NFC: Denna limmas på en yta av metall.
Squircle On-metal: Passar på
alla typer av utrustning och kan gömmas bakom en skyddande krympslang.
Läs mer om inspektion & Scannable här.
Se alla produkter från Scannable här.
Faktura skickas separat för dessa produkter och ska betalas före leverans
Vi står på den säkra sidan. Vart står du?
Välkommen att höra av dig till Sveriges personligaste webbutik.
